AUTONET TV

No Fountain of Youth (Aging Tires)

Can you think of anyone who enjoys aging?  Wrinkles where you don't want them, gray hair, eyes that won't focus any more, no stamina. 

Believe it or not, your tires age, too, and they don't get better the older they get.  And here's the important thing to know, even if they can still pass a tread depth test, they may simply be too old to be safe 

Here's the best way to understand this.  Have you ever found an old deck of playing cards with a rubber band wrapped around them?  Try stretching the rubber band.  SNAP! It's all cracked and brittle.  And you haven't stressed that rubber one bit since the time you put them in that drawer.

Now you know what's happening to your tires.  Rubber ages.  Just like us, the day we come into the world, we start to go downhill (no pun intended).  Oh, engineers are able to make a tire last longer than ever before.  But that gas that keeps us alive—oxygen—seems to love to chemically mix with some components in rubber.  Oxidation causes rubber to become hard and brittle.  The rubber band test.

Is there an age test that can tell you when a tire is tool old to roll? Well, not really.  They don't all age the same.  Hot climates can make tires wear out more quickly.  Some experts say a tire can last up to 10 years but should be inspected every year after the age of five.  Others say tires should have an expiration date at six years old.

Since no one would ever ask a tire its age, how do you know how old one is? Believe it or not, tires made after the year 2000 have a date code stamped on either the inside or the outside of the sidewall.  It's a four-digit numbers; the first two tell you the week, the second two tell you the year. So if it has the number 1916, it was made in the 21^st week of 2016. 

Another way to find out if your tires still have enough life in them is to have your vehicle service facility inspect them.  They look for signs of age, such as developing cracks in the rubber, the condition of the sidewalls and, of course, that old standby: tread.  If it's time to "retire" them, discuss options with your service advisor.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
http://www.unionstreetautomotive.net

Braking Good (Brake Drum Replacement)

Maybe your vehicle feels like Breaking Bad.  In other words, when you brake, things are bad.  You may find it takes you a longer distance to stop, you feel a vibration, or it’s pulsating when you depress the brake pedal, or perhaps your vehicle pulls to one side.

Those can be symptoms of failing brake drums.  While a lot more vehicles these days have disc brakes, many vehicles still have brake drums, almost always in the rear wheels. The drum is a cast iron shallow cylinder that surrounds the other parts, including curved brake shoes that press pads against the drum to slow you down or stop the vehicle.

Any time you have things going wrong with your brakes, you should get them fixed soon.  Safely operating any vehicle depends on having the brakes be able to slow and stop you dependably.  It can make the difference between avoiding a collision and having one. 

When you bring your vehicle in, a technician will inspect your braking system. Depending on the wear, drum brakes can be resurfaced or replaced. Sometimes it’s cheaper to replace the drum than to resurface it.  It’s important for all the other brake system components to be inspected first and all worn parts replaced.  

Most of the time, when you have your drums resurfaced or replaced, the brake shoes should be replaced at the same time. You have brakes at each end of your axles, and the same brake service should be done at both ends so that both sides can have consistent, even stopping power. 

Your brakes can save your life.  If their braking power is bad, you owe it to yourself and others on the road to let us help make them good again.  Good and safe.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
http://www.unionstreetautomotive.net

A Clean Start (Battery Cleaning)

You may be fanatical about keeping the outside of your vehicle clean.  But what about what's under the hood? Have you ever thought about how dirt and grime may be affecting your engine's components?

One of the most important parts under your hood to keep clean is your vehicle's battery.  With a daily barrage of dirt and moisture, outside parts of your battery can corrode, namely the cables and terminals.

Gases vented by batteries can also promote corrosion.  That can create connection problems and affect your vehicle's electrical system.  If corrosion is not cleaned off, it may damage wires and terminals so badly that they will stop properly conducting electricity.  At that point, they may need replacing.

When you bring your vehicle to us for a battery inspection and cleaning, we will remove any corrosion and put corrosion-resistant protection on each post. A technician will also visually inspect your battery.  Plus, we can test how much life is in your battery as part of a more comprehensive battery service. 

Batteries don't last forever and should be regularly cleaned, inspected, and tested.  Usually, they'll need to be replaced anywhere from three to five years after they were first installed, but their lifespan depends on how, where, and how much you drive.  Your battery is a very important component of your vehicle.  Keep yours in tip-top shape, and it's less likely to let you down when you need it most.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
http://www.unionstreetautomotive.net

It's Brake Time (Brake Calipers)

Race car drivers have demonstrated the advantages of disc brakes, so most modern vehicles use them.  Sometimes just the front wheels have disc brakes, but many vehicles now have them all the way around. 

A major component of the disc brake is called a caliper.  It works by squeezing brake pads against the disc or rotor, kind of like a bicycle hand brake.  The brake pads themselves are what contact the rotor, causing friction to build and the wheel to slow down, but it's the calipers that apply the pressure to the pads.

Caliper design has evolved over the years, and there are two common types.  One is called a floating caliper.  It has one or two pistons on one side of the disc. When you push down the brake pedal, the piston or pistons in your caliper put pressure on that one side.  A mechanism connected on the other side of the disc applies pressure as well, squeezing your disc so the vehicle stops.  Floating calipers are less expensive since they have fewer parts.

The other type is called a fixed caliper.  They use pistons on both sides of the disc, sometimes several.  They are often used in more high-performance or heavy-duty vehicles.

Calipers can have rubber seals to keep out dirt, debris and moisture, but when that rubber wears out, sometimes the calipers can get contaminated.  They can stick or start leaking; they can even rust.  Then your caliper can get stuck applying that "squeeze" when you are not pressing on the brake pedal.  Or they can get stuck in the other position, not applying stopping power when you press the pedal.

When this happens, it's not unusual to feel your vehicle pull to one side when you brake.  You might notice a burning smell from the constant friction if the caliper is stuck on, plus you may feel the heat from the wheel after you park and get out of your vehicle.  Sometimes you'll hear a high-pitched sound or clunk if your calipers are binding up. 

That's your cue to have them checked out at your vehicle service center.  If your calipers aren't working correctly, it can be a safety hazard.  Sticking calipers can affect your ability to steer and stop; this is the kind of "brake time" you need so you can get them back on track and working properly.

Union Street Automotive
175 W Union Street
Newark, NY 14513
315-331-2525
http://www.unionstreetautomotive.net